| |
2010 Midway
Machine Shop Service Prices |
|
| |
Call
for Dealer Pricing & Account Set up |
|
| |
CYLINDER
BORING & HONING (MOST 2 & 4 CYCLE, PER HOLE) |
Retail |
| |
|
Prices |
| |
Boring,
Honing and fitting of Piston & Rings |
$50.00 |
| |
Honing
Only - most 2 & 4 cycle |
$21.00 |
| |
Boring
for Big Bore Kits (Boring & Honing Labor Only) |
$65.00 |
| |
|
|
| |
CYLINDER
RESLEEVING (Most 2 & 4 cycle, per hole, includes our sleeves) |
|
| |
(Extra
Large sleeves - material larger than 87mm bore or 90mm
od)
ADD
|
$20.00
|
| |
Most
2 cycles without Power Valves (sleeve included)
|
$210.00 |
| |
Race
Type or Big Bore |
$245.00 |
| |
**
Extra Charge for removal & fit of Power Valves (no final assembly) |
$21.00 |
| |
**
Customer supplied sleeve (labor only - no warranty) |
$145.00 |
| |
**
Removing studs (each) |
$2.50 |
| |
|
|
| |
INSTALLATION
OF 4 STROKE SLEEVES |
|
| |
(Sleeve
based on current price) |
|
| |
Install
4 stroke (Drop-In, Bore, & Hone)
(Labor Only) |
$95.00 |
| |
Install
4 Stroke Sleeve & Big Bore Kits
(Labor Only) |
$120.00 |
| |
boring
cylinder, pressing sleeve bore & hone to
fit piston) |
|
| |
|
|
| |
|
|
| |
OUTBOARDS
& BLIND HOLES (Bore or Hone) - per hole |
|
| |
**
All Covers & Studs must be removed from block or extra charge will
apply |
|
| |
Boring
& Honing - smaller outboards & some V4's |
$70.00 |
| |
Boring
& Honing - larger outboards, blind holes, V4 |
$80.00 |
| |
Boring
& Honing Big
V6 Blocks, inline 6 cylinder,V4 |
$90.00 |
| |
Cylinder Honing Only
- smaller outboards |
$32.00 |
| |
Honing
only - larger outboards, blind holes, V6, V4, & in-line 6 cylinder |
$43.00 |
| |
|
|
| |
OUTBOARDS
RESLEEVED (per hole) |
|
| |
**
All covers & studs must be removed from block or extra charge will
apply. |
|
| |
Resleeve
per hole - smaller outboards (includes sleeve) |
$278.00 |
| |
Resleeve
per hole - larger outboards, blind holes, V6, V4 (includes sleeve) |
$315.00 |
| |
Resleeve
per hole Inline 6 cyl.,Big
V6 Blocks, & V4 (includes sleeve) |
$385.00 |
| |
|
|
| |
HARLEY
DAVIDSON (per cylinder) |
|
| |
|
|
| |
Bore,
Hone & Fit Piston |
$60.00 |
| |
Hone
Cylinder Only |
$27.00 |
| |
Install
Sleeve, Bore, Hone & Fit Piston
Labor Only |
$160.00 |
| |
|
|
| |
OTHER
CYLINDER & HEAD SERVICES |
Starting
at: |
| |
|
|
| |
Cutting
of Cylinder Base (gasket area) |
$25.00 |
| |
Milling
Head, Gasket Surface Only |
$25.00 |
| |
Mill
Mono Head, Gasket Surface Only |
$42.00 |
| |
Grind
Valve & Seat Assembly |
$23.00 |
| |
Replace
Valve Guides
Labor Only |
$40.00 |
| |
Stud
Removal (Not responsible for damaged gaskets) |
$2.50 |
| |
Cover
Removal (Not responsible for damaged gaskets) |
$18.00 |
| |
Remove
& Fit Power Valve (No final assembly) |
$21.00 |
| |
Boring
Cylinder Crank Case Holes |
$35.00 |
| |
Helicoil
Repair (per hole) |
$25.00 |
| |
Remove
broken cylinder stud (does not include Helicoil Installation)
|
$24.00 |
| |
CRANKSHAFT
REBUILDING (snowmobile, motorcycle, watercraft) |
|
| |
Extra
Heavy & Larger Cranks 2, 3, and 4
Cyliner
Additional:
|
$45.00
|
| |
Single
Cylinder (truing only) |
$45.00 |
| |
Single
Cylinder, rebuild & tru (plus parts) |
$80.00 |
| |
Single
Cylinder Tin Covered Cranks, rebuild & Tru (plus parts) |
$98.00 |
| |
Twin
Cylinder (Truing Only) |
$88.00 |
| |
Twin
Cylinder, Rebuild & Tru (plus parts) |
$160.00 |
| |
3
cylinder (Truing only) |
$95.00 |
| |
3
cylinder, Rebuild & Tru (plus parts) |
$200.00 |
| |
4
cylinder (truing only) |
$115.00 |
| |
4
cylinder, rebuild & tru (plus parts) |
$260.00 |
| |
Rod
Reconditioning (2 Stroke) |
$20.00 |
| |
Any
outboard & Small Engine Cranks |
Call
for Quote |
| |
|
|
| |
**
Prices subject to change without notice |
|
| |
**
All above is subject to a shop material charge of $5.00 |
|
| |
** Midway Machine is
not
responsible for anything left unclaimed over 60 days
|
|
|
|
|
